Title : Challenger Low Mount Spa Cover LiftDescription : This Low-Mount Spa Cover Lift is the perfect answer for lifting your spa cover with ease. Constructed of the highest quality powder-coated steel, the lift will not rust or corrode over time. Our low mount cover lift is designed to fit most square or rectangular spa shapes up to 8 feet wide. Quit wrestling with your spa cover and use this Cover Lift for effortless operation. Comes backed by a 1 Year Warranty.
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review
for another people.
1st Customer Review : Solid metal, Plastic spacers, Bracket attachment weak
This is a basic but sturdy and functional bar that will help you lift the spa cover up into the air a bit and before sliding it down over the side of the spa. Getting it back up again can be hard if your cover weighs a lot because there are no springs or counter weights to help you pull the cover straight up the side of the spa until it's high enough to tilt over onto the top of the spa.
The top bar is 1.25" in diameter. This means that the gusset that connects the two halves of your cover should be at least 2" or the cover will not fold down flat over the bar.
The directions say you'll need 2' clearance all around. You can probably get by with 1 foot on the spa sides where the brackets mount. On the side where the cover will go, you'll want all two feet, and probably extra, even if your cover is only 4 inches thick.
The lifter needs to be assembled with wrenches and a power driver/drill. It ships short 2 washers and 2 more of the nuts should have...
Click here to read the full review for more information about this product.
2nd Customer Review : Easy to install
I was a little skeptical because of the low price, but this really works well. All the parts were included and in good condition. Be careful installing the mounting brackets. The long screws would have pierced the control box had I not pulled the spa inspection covers off to check first. The powder coating seems a little thin on some small sections of the support arms as they show streaks of brownish hue and are not a deep black. I would purchase again even though a little black paint might be needed to prevent rust.
3rd Customer Review : spa cover lifter
product works great but the instructions were a little messed up. only 2 small washers included and i need 4. the lock tight nuts and bolt nuts instructions were misleading. but i got it on and it works and looks great. don't know why everbody else was so expensive on their lifts. a satisfied customer.
Product Features :
- Makes lifting your spa cover easy
- Constructed of high quality powder-coated steel
- Fits most square & rectangular spas up to 8 ft wide
- Won't rust or corrode over time
- Backed by a 1-year warranty
Rating : 4.0
List Price : $199.99
0 comments:
Post a Comment